VD (E3.1) 03/2020 page 159/173
APT-COM™ 4 Multi Management Software for logging and display of temperature data and networking
up to 100 chambers with PC
Connection kit for vacuum pump with various small flange parts
Measuring access port, vacuum, 9 poles (DN 16)
Pump stand VAP 1 with separator and emission condenser, ready for connection
Pump stand VAP 2 with separator and emission condenser, ready for connection
Factory calibration certificate
Extension to factory calibration certificate (additional value)
Factory calibration certificate for object temperature display
Factory calibration certificate for pressure display
Extension to factory calibration certificate for pressure display (additional pressure)
Evaporating dish with rim, small or large
Stable table on wheels with castors and locking brakes
26.5 Accessories and spare parts (extract)
BINDER GmbH is responsible for the safety features of the chamber only, provided skilled
electricians or qualified personnel authorized by BINDER perform all maintenance and repair,
and if components relating to chamber safety are replaced in the event of failure with original
spare parts. The user is responsible for any risks arising from using unauthorized
accessories/components.
Expansion rack, stainless steel
Exchange of aluminum expansion racks for
stainless steel, calibration included
8012-1957 8012-1956 8012-1955
Silicon door gasket, temperature-resistant up to
200 °C / 392°F
6005-0290 6005-0291 6005-0292
FKM door gasket, temperature-resistant up to
150 °C / 302 °F, acid-resistant, silicon free
8012-0500 8012-0501 8012-0502
Pump module with power socket 230 V
Pump module with power socket 115 V
Chamber fuse 5 x 20 mm / 250V / time lag T for
VD 230 V
5006-0092 5006-0093 5006-0079
Chamber fuse 5 x 20 mm / 250V / time lag T for
5006-0079 5006-0103 ---
Chamber fuse 6,3 x 32 mm / 250V / time lag T for
VD 115-UL
--- --- 5006-0030
To Next Page
Loading...
