Getting Started Page 20 of 42
Epoch 2 Instructions for Use 1771011 Revision A BioTek Instruments, Inc.
The right side of the Main Menu provides access to the following features:
• Quick: Define and run an Endpoint read, perform a standalone shake, or
incubate a plate. Quick reads do not support shake or delay actions, and they
read the full plate.
• Protocol: Edit, create (and save), delete, and copy protocols. Through this menu
option, protocols support shake and delay actions.
• Results: Provides access to results for the 12 most recently run protocols. Tap a
protocol name to view its results, and then tap the screen to cycle through the
available data sets (e.g., Raw data, Delta OD, Blanked data).
• Instrument: Run a system test, define date/time settings, enable output to a
printer and/or USB flash drive, configure a Take3 plate, and control
temperature.
Confirm or Set the Time and Date
From the Main Menu, tap Instrument and select the Configuration tab.
• Tap the Time / Time Format and Date / Date Format fields to change the
current settings.
• Set the Decimal Symbol to a period or comma.
• Set the List Separator, used in exported .csv files, to a comma or semicolon.
To Next Page
Loading...
