7: Unpack and Inspect the Dispense Module | 15
7: Unpack and Inspect the Dispense Module
Applies only to Synergy HTX models with injectors.
Important! Save all packaging materials. If you need to ship
the dispense module to BioTek for repair or replacement, you
must use the original materials. Using other forms of
commercially available packaging, or failing to follow the
repackaging instructions, may void your warranty.
During the unpacking process, inspect the packaging, module,
and accessories for shipping damage. If the reader is damaged,
notify the carrier and your BioTek representative. Keep the
shipping boxes and the packaging materials for the carrier’s
inspection. BioTek will arrange for repair or replacement of
your reader immediately.
1. Open the outer shipping box. Remove the foam cap, inner shipping box, and
accessories box.
Figure 5: Unpacking the dispense module’s outer shipping box
Synergy HTX Operator’s Manual
To Next Page
Loading...
Need help?
General
