Instruction manual A400 / A400FB Safety instructions
6.054.98.5.10.06 en 3 - 3
3
CAUTION Chain-, driver hooks, gripper hooks, scraper edge!
Stab and cut wounds.
Twisted guide cogs or chain hooks can cause malfunctions.
– Always wear cut-proof gloves when cleaning.
– Avoid touching the chain hooks.
WARNING
Missing components!
The operator can only be protected from injuries and the machine
protected against damage if all the components of the machine are
assembled properly.
– Check if the machine is complete before it is re-started.
– Check if components are positioned correctly and firmly.
– Only use original Bizerba spare parts and accessories.
3.5 Protective and safety equipment
– Blade guard ring, stationary, cannot be removed
– Blade cover closed, stationary, can be removed
– Gauge plate, covering carriage stroke area
– Back panel, not removable
– Protective cover for carriage guide, covering length of stroke
– Automatic switch-off when drive system is overloaded
– Automatic switch-off of blade and carriage drive when in product loading position
– Cleaning program, locked machine setting
– Sharpening program, locked machine setting
Remaining risks that cannot be excluded by technical measures:
– Risk of tripping/slipping if the work area is not kept tidy.
– Risk of injury if the required personal protective clothing is not
worn.
To Next Page
Loading...
Need help?
General
