Instruction manual A400 / A400FB Machine and operating elements
6.054.98.5.10.06 en 5 - 11
5
Fig. 27: Cleaning station
5.11 Paper holder
The paper holder is used when the sliced product has to be delivered straight on to paper
or foil.
Positioning of several sheets of paper or film:
Fig. 28: Paper holder
Using your thumb, press lever to the
right against spring pressure until it
clicks into place.
Push the stack underneath the open
holder.
Release the lever by pressing the top of
it lightly out of the locked position.
Removing of deposited portions and paper:
Using your thumb, press lever slightly to the right; at the same time pull top-most
piece of paper with portion under the open holders.
Release lever.
To Next Page
Loading...
Need help?
General
