Instruction manual A400 / A400FB Maintenance
6.054.98.5.10.06 en 8 - 1
8
8 Maintenance
8.1 Preparation for cleaning
Clean thoroughly:
– before putting into operation
– depending on use and application frequency
– if extremely soiled, several times a day
– after sharpening
– after a longer down time
WARNING Unprotected blade!
Coming in contact with the sharp blade can lead to serious inju-
ries.
– Always wear cut-proof gloves when cleaning.
– Do not clean the surfaces of the blade when operating the ma-
chine!
Press
<Clean> on operating panel.
The cleaning station appears in the display, the keyboard is inactive, see chapter 5.10.
Tilt the carriage to the outside
Fig. 35: Tilt the carriage to the outside
Unscrew star knob at carriage foot and
tilt carriage outwards.
Switch off the machine and remove AC
power plug.
To Next Page
Loading...
Need help?
General
