Installation Instruction manual A400 / A400FB
4 - 2 6.054.98.5.10.06 en
4
The installation surface needs to:
– provide sufficient space, Dimensions, see chapter 9.1
– be horizontal and flat
– be slip-proof and tilt-proof
– be stable and rigid, Machine weight, see chapter 9.1
The recommended table height is approx. 800 mm.
4.2.2 Electrical connection
Information on the rating plate
Bizerba logo BIZERBA
Machine type A402 / A404 / A406 A402FB / A404FB / A406FB
Machine description Slicer
Machine number ... ...
Production code X-.. X-..
Protection class IP 33 IP 33
Electrical data see specification plate
Manufacturer's address Bizerba GmbH & Co.KG
D-72336 Balingen
MADE IN GERMANY
Check before mains connection
Before you connect the machine, check the electric data on the rating
plate with the mains data about the power supply.
CAUTION Incorrect supply voltage!
Damage of electric components, fire hazard.
– Do not connect the machine to the power supply if the power sup-
ply data does not correspond to the machine's connection values.
Mains data must be identical.
– Inform Bizerba Customer Service.
To Next Page
Loading...
Need help?
General
