Bizerba A400 - Care of Machine, Servicing, Maintenance

Maintenance Instruction manual A400 / A400FB
8 - 22 6.054.98.5.10.06 en
8
Preparing the machine for operation.
WARNING Missing components!
The operator can only be protected from injuries and the machine
protected against damage if all the components of the machine are
assembled properly.
– Check if the machine is complete before it is re-started.
– Check if components are positioned correctly and firmly.
– Only use original Bizerba spare parts and accessories.
8.7 Care of machine, servicing, maintenance
The entire machine must be thoroughly cleaned based on usage, but at least twice a
day.
After every cleaning, lubricate positions
1 to 6 lightly with oil from the accesso-
ries kit.
1
Gauge plate axis
2
Product holder guide axis
3
Toothed rack
4
Ball bearing
5
Bearing
6
Ball bearing in deflection roller
Re-sharpen blade if necessary.