Machine and operating elements Instruction manual A400 / A400FB
5 - 10 6.054.98.5.10.06 en
5
Fig. 26: Grinding station
<F7> Blade on
<F9> Blade off
Comment: Exit the grinding station by pushing on <Clean>.
5.10 Cleaning station
This display appears after pushing on <Clean>.
Comment: Do not switch off machine yet. Table, sliced product feed, slice thickness and
depositing arm run in the cleaning setting.
Do not tilt out carriage until you hear a clear "Clack" sound.
Switch off the machine and remove AC power plug before cleaning.
To Next Page
Loading...
Need help?
General
