BK Precision 2190E User Manual

92
FFF
The time between the first falling edge of source X
and the first falling edge of source Y.
LRR
The time between the first rising edge of source 1
and the last rising edge of source 2.
LRF
The time between the first rising edge of source X
and the last falling edge of source Y.
LFR
The time between the first falling edge of source X
and the last rising edge of source Y.
LFF
The time between the first falling edge of source X
and the last falling edge of source Y.
If you want to measure voltage parameters, please follow the steps
below:
1. Press the “MEASURE” button to enter the “Auto measurement”
menu.
2. Press the first option button to enter the “second measurement
menu”.
3. Select measure type. If you press the “Voltage” option button,
“Voltage measurement” menu will display on the screen.
4. Press the “Source” option button to select “CH1”, “CH2”
according to input signal channel.
5. Press the “Type” option button to select the parameter type that
you want to measure. The corresponding icon and value will
display below the measure parameter.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

BK Precision 2190E Specifications

General

Brand	BK Precision
Model	2190E
Category	Test Equipment
Language	English