Safety Notices 12
Do not operate instrument if damaged
If the instrument is damaged, appears to be damaged, or if any
liquid, chemical, or other material gets on or inside the instrument,
remove the instrument’s power cord, remove the instrument from
service, label it as not to be operated, and return the instrument to
B&K Precision for repair. Notify B&K Precision of the nature of any
contamination of the instrument.
Hazardous voltages may be present in unexpected locations in
circuitry being tested when a fault condition in the circuit exists.
Clean the instrument only as instructed
Do not clean the instrument, its switches, or its terminals with
contact cleaners, abrasives, lubricants, solvents, acids/bases,
or other such chemicals. Clean the instrument only with a clean
dry lint-free cloth or as instructed in this manual. Not for critical
applications.
To Next Page
Loading...
