Operation Modes 51
6.4.2 Run Battery Test
To run the battery test operation RUNMODE must be set to BATTERY and CC
must be selected by pressing the
button. For more information about
RUNMODE please refer to section RUNMODE.
To run a previously saved battery test prole:
Step 1. Press the + buttons to enter the RECALL menu.
If RUNMODE is not set to BATTERY the RECALL menu will not be accessible.
Step 2. Use the numeric keypad to set the RECALL BATTTERY location. Press the to load
the specied battery le.
Step 3. Provide the required trigger to execute the battery test.
– The initiation trigger required will vary based on the currently set trigger type. For additional
details on the available trigger types, please refer to section 7.5.
To Next Page
Loading...
