General Information 16
3.2 Features
• 16-bit voltage and current measurement system providing up to 0.1 mV / 0.1 mA resolution
• Supports both SCPI and backwards compatible 8500 series protocol
• CC/CV/CR/CW operating modes
• List mode
• Transient mode up to 10 kHz in CC mode
• Measurement speed up to 40 kHz
• Remote sense function
• Battery test function
• OCP and OPP automatic test
• CR-LED function
• Store/recall up to 100 setups
• Analog current monitoring
• Adjustable slew rate in CC mode
• OVP/OCP/OPP/OTP and reverse voltage protection
3.3 Contents
Please inspect the instrument mechanically and electrically upon receiving it. Unpack all items from the
shipping carton, and check for any obvious signs of physical damage that may have occurred during
transportation. Report any damage to the shipping agent immediately.
Save the original packing carton for possible future reshipment. Every instrument is shipped with the
following contents:
• 8500B series DC Electronic load
• IT-E132B USB to TTL adapter
• AC Power Cord
• Certicate of Calibration
To Next Page
Loading...
Need help?
General
