BK Precision 8500B Series User Manual

Operation Modes 48
6.3.1 Create/Edit a List File
List mode consist of two portions List Setup and List Conguration.
To setup up list mode follow the steps below:
Step 1. Press the
+ buttons to enter the LIST menu.
Step 2. Use the right and left navigation keys to select EDI, then press the
In order to edit a le List mode must be disabled.
Step 3. Use the numeric keypad to set the LIST RANGE. Press the to conrm the list range.
Step 4. Use the numeric keypad to set LIST STEP. Press the to conrm the number of step
in the le.
Step 5. Use the numeric keypad to congure the STEP <n> parameters.
• Use the numeric keypad to set the Sink Current. Press the to conrm the current
sink value of the displayed step.
• Use the numeric keypad to set the Slew Rate. Press the
to conrm the current’s
rise and fall time of the displayed step.
• Use the numeric keypad to set the Dwell time. Press the to conrm the dwell time
of the displayed step.
Step 6. Repeat all step’s parameters conguration for the remaining step in the le.
Step 7. Use the numeric keypad to set the REPEAT. Press the to conrm the number of times
the list program will repeat.
Step 8. Use the numeric keypad to assign a SAVE LIST location. Press the
to conrm the
internal memory location where the le will be stored.

BK Precision 8500B Series Specifications

General

Brand	BK Precision
Model	8500B Series
Category	Test Equipment
Language	English