BK Precision 8500B Series User Manual

Getting Started 29
If the load is not drawing power from the DC power supply, check all load
protection limits and settings within the menu to verify that the load is congured
to allow drawing power at 5V, 0.500 A. Also, verify that the CC mode parameters
are setup to operate within the congured valid ranges by pressing +
If after checking all of the above, and verifying the power supply used for testing is not at fault, contact
B&K for further assistance.

BK Precision 8500B Series Specifications

General

Brand	BK Precision
Model	8500B Series
Category	Test Equipment
Language	English