STATus Subsystem
This subsystem controls SCPI defined status reporting structures.
STATus:QUEStionable:EVENt?
This command queries Status Questionable Even Register. The power supply
returns a decimal value which is the binary weighted sum of all bits of the
register. Reading Status Questionable Event Register does not clear it.
STATus:QUEStionable:ENABle <enable value>
This command sets Status Questionable Enable Register. This is a mask
register.
If a bit of this register is set, the coresponding bit of Standard Event Register
is reported to Status Byte Register.
STATus:QUEStionable:ENABle?
This command queries Status Questionable Enable Register. The power supply
returns a decimal value which is the binary weighted sum of all bits of the
register.
To Next Page
Loading...
Need help?
General
