71
MEMory Subsystem
This subsystem contains commands that manage power supply’s memory
locations.
MEMory:STATe:NAME <numeric value>,<quoted string>
This command allows you to name a memory location.
The numeric value parameter gives the number of the memory location that
will be named. It can be between 0 and 99.
The quoted string contains the name of the location. The name can be sent
between simple or double quotes and it can have up to 10 characters.
When delivered, the power supply has 99 locations free and one location
ocupied (power_up state is saved in location 0). Free locations have no name
when the power supply is delivered (the name is 10 space characters). The state
name is saved in the non-volatile memory.
Location 0 (power_up state) cannot be renamed. The rest of the locations can
all be renamed, without notice.
MEMory:STATe:NAME? <numeric value>
This command queries the nameof the specified location.
To Next Page
Loading...
Need help?
General
