Black Box LPB2848A - Dynamic MAC Table

724-746-5500 | blackbox.com
Page 112
724-746-5500 | blackbox.com
Chapter 3: Configuration
3.11.2 Dynamic MAC Table
Entries in the MAC Table are shown on this page. The MAC Table contains up to 8192 entries and is sorted first by VLAN ID then
by MAC address.
Web Interface
To Display MAC Address Table in the Web interface:
1. Click Dynamic MAC Table.
2. Specify the VLAN and MAC Address.
3. Display MAC Address Table.
Figure 3-54. The Dynamic MAC Address Table information screen.
Parameter Description
MAC Table Columns
• Type: Indicates whether the entry is a static or a dynamic entry.
• VLAN: The VLAN ID of the entry.
• MAC Address: The MAC address of the entry.
• Port Members: The ports that are members of the entry.
• Auto-refresh: Check the auto-refresh box to set the unit to refresh information automatically.
• Icons, upper right (Refresh, Clear, <<, >>): Click to refresh the MAC address manually. Press Clear to clear all new entries
from the MAC table. Press << or >> to scroll to the next entry on the table.
NOTE the following MAC addresses:
00-40-C7-73-01-29: your switch MAC address (for IPv4).
33-33-00-00-00-01: Destination MAC (for IPv6 Router Advertisement) (reference IPv6 RA.JPG).
33-33-00-00-00-02: Destination MAC (for IPv6 Router Solicitation) (reference IPv6 RS.JPG).
33-33-FF-73-01-29: Destination MAC (for IPv6 Neighbor Solicitation) (reference IPv6 DAD.JPG).
33-33-FF-A8-01-01: your switch MAC address (for IPv6 global IP).
FF-FF-FF-FF-FF-FF: for Broadcast.
LPB2810A