Black Box LPB2848A - Page 134

724-746-5500 | blackbox.com
Page 134
724-746-5500 | blackbox.com
Chapter 3: Configuration
1. GVRP Mode
This configuration is to enable/disable GVRP Mode on particular port locally.
- Disable: Select to disable GVRP Mode on this port.
- Enable: Select to enable GVRP Mode on this port.
The default value of configuration is Disable.
2. GVRP role
This configuration is used to configure restricted role on an interface.
- Disable: Select to disable GVRP rrole on this port.
- Enable: Select to enable GVRP rrole on this port.
The default configuration is Disable.
• Auto-refresh: Check the auto-refresh box to set the unit to refresh information automatically.
• Icon, upper right of screen (Refresh): Click to refresh the GVRP Global information manually.
• Buttons:
- Save: Click to save changes.
- Reset: Click to undo any changes made locally and revert to previously saved values.
LPB2810A