Black Box LPB2848A - Page 138

724-746-5500 | blackbox.com
Page 138
724-746-5500 | blackbox.com
Chapter 3: Configuration
Figure 3-73. The QoS Ingress Port Policers Configuration screen.
Parameter Description
• Port: The logical port for the settings contained in the same row. Click on the port number to configure the schedulers.
• Mode: Check the port to enable the QoS Ingress Port Policers function.
• Rate: To set the rate limit value for this port, the default is 500.
• Unit: To scroll to select what unit of rate includes kbps, Mbps, fps and kfps. The default is kbps.
• Flow Control: To evoke to enable or disable flow control on port.
• Buttons:
- Save: Click to save changes.
- Reset: Click to undo any changes made locally and revert to previously saved values.
LPB2810A