724-746-5500 | blackbox.com
Page 148
724-746-5500 | blackbox.com
Chapter 3: Configuration
Parameter Description
• DSCP: Maximum number of supported DSCP values are 64, and valid DSCP value ranges from 0 to 63.
• Ingress: The Ingress side DSCP can be first translated to new DSCP before using the DSCP for QoS class and DPL map. There
are two configuration parameters for DSCP translation:
1. Translate : DSCP at Ingress side can be translated to any of (0–63) DSCP values.
2. Classify : Click to enable Classification at Ingress side.
• Egress: The following configurable parameters are for the Egress side:
1. Remap DP0 : Select the DSCP value from select menu to which you want to remap. DSCP values range from 0 to 63
2. Remap DP1 : Select the DSCP value from select menu to which you want to remap. DSCP values range from 0 to 63.
Following this, there is a configurable parameter for the Egress side.
Remap: Select the DSCP value from select menu to which you want to remap. DSCP values range from 0 to 63.
• Buttons:
- Save: Click to save changes.
- Reset: Click to undo any changes made locally and revert to previously saved values.
LPB2810A
To Next Page
Loading...
