Black Box LPB2848A - Page 159

724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 159
Chapter 3: Configuration
Parameter Description
• sFlow Ports: List of the port numbers on which sFlow is configured.
• sFlow Instance: Configured sFlow instance for the port number.
• Sampler Type: Configured sampler type on the port and could be any of the types: None, Rx, Tx or All. Scroll to choose. By
default, The value is “None”.
• Sampling Rate: Configured sampling rate on the ports.
• Max Hdr Size: Configured size of the header of the sampled frame.
• Polling Interval: Configured polling interval for the counter sampling.
• Buttons:
- Edits the Data source sampler configuration.
- Save: Click to save changes.
- Reset: Click to undo any changes made locally and revert to previously saved values.
- Cancel: Click to clear any unsaved changes you have made.
• Auto-refresh: Check the auto-refresh box to set the unit to refresh information automatically.
• Icon, upper right of screen (Refresh): Click to refresh the sFlow Sampler information manually.
LPB2810A