724-746-5500 | blackbox.com
Page 24
724-746-5500 | blackbox.com
Chapter 2: System Configuration
Parameter Description
• Group Name
The name identifying the privilege group. In most cases, a privilege level group consists of a single module (e.g. LACP, RSTP or
QoS), but a few of them contain more than one. The following description defines these privilege level groups in detail:
- System: Contact, Name, Location, Timezone, Log.
- Security: Authentication, System Access Management, Port (contains Dot1x port, MAC based and the MAC Address Limit),
ACL, HTTPS, SSH, ARP Inspection and IP source guard.
- IP: Everything except 'ping'.
- Port: Everything except 'VeriPHY'.
- Diagnostics: 'ping' and 'VeriPHY'.
- Maintenance: System Reboot, System Restore Default, System Password, Configuration Save, Configuration Load and
Firmware Load, Web users, Privilege Levels, and everything in Maintenance.
• Privilege Levels
Every group has an authorization Privilege Level for the following subgroups: configuration read-only; configuration/execute
read-write; status/statistics read-only; status/statistics read-write (e.g. for clearing of statistics). User Privilege should be same or
greater than the authorization Privilege level to have the access to that group.
LPB2810A
To Next Page
Loading...
