724-746-5500 | blackbox.com
Page 56
724-746-5500 | blackbox.com
Chapter 3: Configuration
LPB2810A
- Permit: Frames matching the ACE may be forwarded and learned.
- Deny: Frames matching the ACE are dropped.
• Rate Limiter: Indicates the rate limiter number of the ACE. The range is 1 to 16.
When Disabled is displayed, the rate limiter operation is disabled.
• Port Copy: Indicates the port copy operation of the ACE. Frames matching the ACE are copied to the port number. The
permitted values are disabled or a specific port number. When Disabled is displayed, the port copy operation is disabled.
• Mirror: Specify the mirror operation of this port. The permitted values are:
- Enabled: Frames received on the port are mirrored.
- Disabled: Frames received on the port are not mirrored.
The default value is “Disabled“.
• CPU: Forward packet that matched the specific ACE to CPU.
• CPU Once: Forward first packet that matched the specific ACE to CPU.
• Counter: The counter indicates the number of times the ACE was hit by a frame.
• Conflict: Indicates the hardware status of the specific ACE. The specific ACE is not applied to the hardware because of
hardware limitations.
• Auto-refresh: Click auto-refresh to refresh the information automatically.
• Icon, upper right of screen (Refresh): Click to refresh the ACL status information manually.
To Next Page
Loading...
