724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 81
Chapter 3: Configuration
• Mode: Indicates the filtering mode maintained per (VLAN ID, port number, Group Address) basis. It can be either Include or
Exclude.
• Source Address: The IP Address of the source. Currently, system limits the total number of IP source addresses for filtering to
128.
• Type: Indicates the Type. It can be either Allow or Deny.
• Auto-refresh: To set the unit to auto-refresh the information, check the “auto-refresh“ box.
• Icons, upper right of screen (Refresh, <<, >> ): Click Refresh to refresh the IGMP Group Status manually. Click the arrows to
navigate to the next page or entry.
LPB2810A
To Next Page
Loading...
