Blackmagicdesign DeckLink Series User Manual

Connection Diagrams
52
Connecting to a YUV component monitor
This example shows DeckLink HD Extreme 3D+ connected to a multiformat Sony BVM monitor via
component analog video. Connect three BNC cables from DeckLink’s Y, B-Y and R-Y output cables
to the corresponding component analog inputs of the Sony BVM monitor. You can use this for SD or
HD capture and playback monitoring with analog, SDI and HDMI video sources.
AC IN
MAIN POWER
I
O
ANALOG CONNECTORS
REMOTE 1
IN
REMOTE 1
OUT
REMOTE 2
ISR
Y/G
PB/B
PR/R
CONTROL UNIT
SYNC
IN
OUT
IN
OUT
IN
OUT
IN
OUT
AC IN
MAIN POWER
I
O
ANALOG CONNECTORS
REMOTE 1
IN
REMOTE 1
OUT
REMOTE 2
ISR
Y/G
PB/B
PR/R
CONTROL UNIT
SYNC
IN
OUT
IN
OUT
IN
OUT
IN
OUT
2 3 4 5 6 7 8 9 10 11 12 13 14 15
DeckLink HD Extreme 3
Breakout Cable
Cards which can be used in
this workflow...
DeckLink HD Extreme 3D+
DeckLink Studio 2
Previous DeckLink cards
DeckLink Extreme
DeckLink Extreme PCIe
DeckLink HD Extreme
DeckLink HD Extreme 2
DeckLink HD Extreme 3
DeckLink HD Extreme 3D
DeckLink HD Pro 4:2:2 PCI-X
DeckLink HD Pro 4:4:4 PCI-X
DeckLink HD Pro PCIe
DeckLink HD Studio
DeckLink Pro
DeckLink SP
DeckLink SP PCIe
DeckLink Studio

Blackmagicdesign DeckLink Series Specifications

General

Interface	PCIe
Bit Depth	8-bit, 10-bit, 12-bit (Varies by model)
Chroma Sampling	4:2:2, 4:4:4 (Varies by model)
Category	Video Capture & Playback Card
Video Inputs	SDI, HDMI (varies by model)
Video Outputs	SDI, HDMI (varies by model)
Audio Inputs	Embedded in SDI/HDMI, Analog (varies by model)
Audio Outputs	Embedded in SDI/HDMI, Analog (varies by model)
Supported Resolutions	4K (varies by model)
Operating System Support	macOS, Windows, Linux