Blackmagicdesign DeckLink Series User Manual

Previous DeckLink Cards – Connection Diagrams
80
DeckLink HD Extreme
Consumer Breakout Cable
3
4
5
7
8
9
10
12
13
14
15
B-Y Input
Y Input
S-Video
B-Y Input
Y Input
S-Video
B-Y Input
Y Input
S-Video
B-Y Input
Y Input
S-Video
B-Y Input
Y Input
S-Video
B-Y Input
Y Input
S-Video
DeckLink HD Extreme 2 - connecting to S-Video
This example shows DeckLink HD Extreme 2 connected to a standard definition Sony PVM monitor
via composite analog video. Connect a BNC cable from DeckLink’s Y output cable to the composite
analog video input of the Sony PVM monitor. You can use this for SD capture and playback monitoring
with analog, SDI and HDMI video sources.

Blackmagicdesign DeckLink Series Specifications

General

Interface	PCIe
Bit Depth	8-bit, 10-bit, 12-bit (Varies by model)
Chroma Sampling	4:2:2, 4:4:4 (Varies by model)
Category	Video Capture & Playback Card
Video Inputs	SDI, HDMI (varies by model)
Video Outputs	SDI, HDMI (varies by model)
Audio Inputs	Embedded in SDI/HDMI, Analog (varies by model)
Audio Outputs	Embedded in SDI/HDMI, Analog (varies by model)
Supported Resolutions	4K (varies by model)
Operating System Support	macOS, Windows, Linux