Blackmagicdesign Teranex 2D Processor User Manual

Understanding the LCD Menus
51
CC Enable
The CC Enable menu allows you to turn closed captioning ON or OFF in the output video of the Processor.
Disabling the captions may be helpful if the incoming closed caption data is incorrect or corrupt.
 The default setting for this menu is Off.
Analog In Line
The Analog In Line selection is used to identify the line on which closed caption information will be
located in the incoming video. This menu applies only to sources with analog closed captions. If your
captions are digital, they will be automatically detected.
 The range of adjustment is lines 20 to 22.
 The default setting is line 21.
Main Menu
Back
Setup
Ancillary
Data
Noise
Reduction
Video
1
Main Menu
Ancillary Data
Back
Video
Index
Timecode
Closed
Caption
2
Ancillary Data
On
Off
Closed Caption
Back
Service 2
Language
Service 1
Language
Service 2
Source
Analog
Out Line
Analog
In Line
CC
Enable
3
Closed Caption /
CC Enable
Main Menu
Back
Setup
Ancillary
Data
Noise
Reduction
Video
1
Main Menu
Ancillary Data
Back
Video
Index
Timecode
Closed
Caption
2
Ancillary Data
Set Value
21
Back
Service 2
Language
Service 1
Language
Service 2
Source
Analog
Out Line
Analog
In Line
CC
Enable
3
Closed Caption /
Analog In Line

Blackmagicdesign Teranex 2D Processor Specifications

General

Brand	Blackmagicdesign
Model	Teranex 2D Processor
Category	Media Converter
Language	English