BLADDERSCAN BVI 9400 - Battery Specifications

68
BATTERY SPECIFICATIONS
The BladderScan BVI9400 is provided with two lithium‑ion batteries. A battery icon on the instrument display is
always present indicating how much power remains and when the battery needs to be changed. You can change
the battery whenever necessary. Verathon
®
recommends that you replace your batteries every two years.
Removing a discharged battery and replacing it with a charged battery should not erase any saved exams
or user settings. In the event any user settings change, reset them by following the instructions in the
SettingUp section of this manual.
Use only the battery charger provided with the BVI9400. Any other battery charger may damage the battery.
Table 26. Battery Specifications
CONDITION DESCRIPTION
Battery type Lithium‑ion
Battery life
A fully charged battery can provide approximately 30exams within a
24‑hour period.
Charging time
Charging time offline will take no more than 6 hours from an empty
battery to a full charge.
Rated capacity 5200mAh
Normal voltage 10.89V
Max charging voltage 12.6V
Max weight 350g (0.77lb)
Width 79mm (3.11in)
Length 118mm (4.65in)
Thickness 23mm (0.91in)