15
Operation
MenuSelect Control
PRODUCT PROGRAMMING
Entering the Program Mode
1. Press the PROGRAM KEY (17). If the control is pass-
word protected, the display reads ENTER CODE. Use the
alpha/numeric keypad to enter the manager passcode.
Press the OK to enter the program mode.
Naming a Product Recipe
NOTE: Use the following procedure to name a new prod-
uct or edit the name of an existing product.
1. For a new recipe, press the down arrow key to the
rst open product. Press OK to select.
To edit an existing name, press the down arrow key
to display the name to be changed. Press OK to se-
lect.
2. Use the arrows to scroll down to Edit Name.
Press OK to enter the edit name menu.
3. Use the arrows or the alpha/numeric keypad to select
the rst character. Press OK to advance to the next
character. Repeat for all remaining characters.
NOTE: Product names may be up to 10 characters
long and can contain spaces. Use the #1 key
to insert spaces in a recipe name.
NOTE: To select letters using the keypad, press the
appropriate key once if you need the rst let-
ter on the key, twice for the second and three
times for the third. For example to enter the
letter L press the #5 key three times.
4. Press the PROG KEY (17). With SAVE highlighted,
press OK to save the product name.
Programming a Product Recipe
NOTE: The control can hold 99 recipes. Each recipe may
have up to 6 cooking stages.
1. Use the arrows to highlight the name of the product
to be programmed. Press OK to select the product.
2. The display reads PRODUCT NAME: STAGE 1.
Press OK to select the stage.
3. Use the arrows or the alpha/numeric keypad to enter
the desired bake time. Press OK to set the bake time.
NOTE: Time is set in one minute increments using
the arrows. To set time in less than one min-
ute increments use the alpha/numeric key-
pad.
4. Use the arrows to select the desired cooking mode.
Choose from combi, steam, hot air or retherm. Press
OK to set the cook mode.
If Combi or Retherm are selected, use the arrows or
the alpha/numeric keypad to enter the desired per-
centage of steam.
5. Use the arrows or the alpha/numeric keypad to enter
the desired cook temperature. Press OK to set the
bake temperature.
NOTE: Temperature is set in 5 degree increments
using the arrows. To set time in less than 5
degree increments use the alpha/numeric
keypad.
NOTE: Retherm has a temperature limit of 250-300F.
6. Use the arrows to select the desired fan speed.
Choose from gentle, low, high or turbo. Press OK to
set the fan speed.
To Next Page
Loading...
