Blodgett Mark V Series - Programming Oven Offset

MARK V
3-11
PROGRAMMING THE OFFSET
Entering the offset programming mode
1. Press the prog key. The top display reads
CodE.
2. Use the product keys to enter the offset proĆ
gramming access code: 4 5 2 3. Press the enĆ
ter key. The top display reads oFF. The bottom
display reads SEt.
Programming the temperature offset
1. Press the scan key. The top display reads
oFST. The bottom display reads either xxF or
-xxF.
2. Press the toggle/clear key to toggle between
positive and negative. Use the product keys to
the enter the desired temperature offset.
3. Press the scan key to enter the new temperaĆ
ture offset.
Exiting the offset programming mode
1. Press the prog key. The control returns to the
operating standby mode.