| 1 689 989 027 2009-03-26| Robert Bosch GmbH
Maintenance | BEA 460 | 31BEA 460 | 31 | 31 en
5.3.8 NO sensor
Over the course of time, the NO sensor is subject to
wear. The NO measurement zero point is constantly
monitored. In the event of deviation, the following fault
message appears: "NO channel setting outside
tolerance". The NO sensor must then be replaced
and the NO channel re-adjusted (refer to ESA program
description 1 689 979 659).
! Always use the genuine NO sensor (NOXO 100 Nitric
Oxide Sensor; order number 1 687 224 954).
The NO sensor contains acid.
Caution: Corrosive!
! Old NO sensors are classed as hazardous waste and
must be disposed of in accordance with the applicable
regulations. The disposal code is 16 05 02 (European
waste catalog: EAK code). As an alternative to the
public disposal facilities available, these components
can also be sent for disposal to the AA-DGP/LOG2
Repair Service.
5.4 Replacement parts, wearing parts
Designation Order number
Adapter cable
<)
for connection of clip-on trigger
and connecting cable term.1/TD/TN/EST
1 684 463 442
Connecting cable term.1/TD/TN/EST
<)
1 684 460 196
Clip-on trigger (6 m)
<)
1 687 224 842
Connecting cable for Bluetooth
serial adapter
<)
1 684 460 278
Connecting cable for
cigarette lighter socket
<)
Adapter cable with battery terminals
<)
1 684 460 213
1 684 463 403
Bluetooth serial adapter 1 687 023 474
Power cord 1 684 461 106
Exhaust gas sampling probe
for gasoline pass. veh.
<)
1 680 790 049
Exhaust gas sampling hose
for pass. veh. (8 m)
<)
1 680 706 043
Coarse filter
<)
1 687 432 005
Oil temperature sensor for
passenger vehicles
<)
(80 cm immersion depth)
1 687 230 042
RTM 430 1 687 022 599
Adapter cable for RTM connecting cable
<)
1 684 465 594
KTS 540
Power supply unit
Power cord
1 687 022 393
1 687 022 889
1 684 461 106
OBD diagnosis cable 1.5 m
<)
1 684 465 555
USB connecting cable 3 m
<)
1 684 465 562
Serial connecting cable
*)
1 684 465 371
Bluetooth USB adapter for PC 1 684 023 449
<)
Wearing part
To Next Page
Loading...
