Bosch DCN Next Generation - Page 58

PRS-FINNA Fiber Interface
Use the PRS-FINNA Fiber Interface to connect a Plastic Optical Fiber (POF) to a Glass Optical
Fiber (GOF). A GOF network can transmit a signal to a larger distance than a POF network.
3
4
21
5
1
Figure 3.62: Exterior of the fiber interface
1. External power supply socket - Connects the fiber interface to an external power supply.
2. Optical network socket (POF) - Connects the fiber interface to a POF.
3. Status LED - A yellow LED that gives information about the condition of the fiber
interface.
4. Status LED - A green LED that gives information about the condition of the fiber interface.
5. GOF socket - Connects the fiber interface to a GOF.
The following sections give more information about the mentioned subject:
– Installation: PRS-FINNA Fiber Interface, page 111.
– Connection: PRS-FINNA Fiber Interface, page 149.
– Operation: PRS-FINNA Fiber Interface, page 255.
3.34
58 en | System Overview Conference System
2013.11 | V2.0 | DCN-NG_OM_V4.x Operation Manual Bosch Security Systems B.V.