BERT
Familiarize yourself with your phone
20
Basic operating rules
"
The loudspeaker is turned on automatically when you dial with the handset on-hook.
Lift the handset when the caller answers. This procedure is useful, if, for example,
the called party is busy and you need to redial the number several times.
Setting up a call
T
o set up a call you have to perform the
two steps described below:
–
prepare for dialing,
–
activate dialing.
The call number is dialed.
It doesn’t matter which of the steps is car
-
ried out first. However
, we recommend to
maintain the described order because it
allows you to correct a number before it is
dialed.
Dial
.– The symbol at the left is always used
for establishing a connection as described
here. The symbol applies to all types of
“dialing preparation” and “dialing com
-
mands”.
Preparing to dial
Y
ou have two possibilities. Leave the hand
-
set on-hook.
Enter the call number manually:
T
ype the desired number using the digit
keys.
or
Enter a stored call number:
Enter a stored number
, e.g. by pressing a
destination key
.
Note:
Y
ou must dial an external line code before
you can enter an external call number
.
1234
BERT
↓
To Next Page
Loading...
