If in doubt, look it up
131
If something goes wrong
The
incorrect date and time are displayed
Select the menu item “Query time/partner”.
The system automatically updates the date and time.
The call number of the calling party is not displayed
The call is transmitted without the call number
, e.g. the call is analog or the caller
has disabled his call number display
.
Partner display has disappeared
The partner display was deactivated in the “Partner” menu. You can reactivate the
display in this menu.
or
Select the menu item “Query time/partner”.
The partner display is updated by the system.
Note:
The display is updated automatically as soon as a partner uses his phone.
Short rings during a call
This indicates a second incoming call. Please see the chapter
Additional call during
an existing call
(→
p. LEERER MERKER) for possible operating steps.
or
Y
ou have activated the monitoring function or handsfree mode. You and your part
-
ner hear a short special information tone.
A function is not performed
Y
our BOSCH TELECOM service representative may need to enable this function.
Functions that have not been enabled are tagged with
.
T
elephone prematurely cancels programming
Y
ou may not have pressed a key during the last 60 seconds. This will cancel all pro
-
gramming procedures.
Programming is also canceled when you answer a call.
To Next Page
Loading...
