Bosch Integral TM13 - Setting Up Partner Groups

VÖLL
e. g.
Using the phone in a partner group
57
Setting up partner groups
Your BOSCH TELECOM service representative can connect extensions in your
system to form groups. Y ou can choose any of these group extensions to create
your own partner group. Y ou can also restrict the status display of your phone on
the phones of your partners.
Creating a partner group
Note:
The call numbers of the extensions in the
partner group must be set up by your
Bosch service representative.
Select the “Partners” menu item in the
“Further functions” submenu and press
“Enter”.
Select the menu item “Expand partner
group”.
Enter the call number or the extension that
you wish to add to your partner group (can
be more than one).
Reducing a partner group
Select the “Partners” menu item in the
“Further functions” submenu and press
“Enter”.
Select the “Reduce group” menu item and
press “Enter”.
Press the partner key for the partner you
would like to remove from the group, e. g.
“Völl”.
Use the cursor key to select the “Delete”
menu item.
'Partners
'Expand partner group 
'Partners
' Reduce group 
'Delete