A
B
C
If in doubt, look it up
100
Telephone
functions overview
Look
up the name of the function if you do not know what this function does, e.g.
Code dialing. This alphabetic list contains the functions that you can assign to the
softkeys (
p. 71).The corresponding symbols or abbreviations then appear on the
display
. Further information can be found on the specified pages.
Programming function keys
Alternate time zone: Y
ou can set the time zone you are in and display the
current time in other cities in the world.
(→
p. 83)
Adjust the volume of the loudspeaker and the receiver
, specify the sound
pattern of various tones and the display contrast.
(only TH
) Within a partner group, this function key enables you to complete
an exchange connection for a partner telephone using your telephone.
(→
p. 68)
Y
ou can divert calls to other phones within your system.
Using this function you can pick up calls from another telephone the call
number of which appears on your display
. T
o do this, enter the number and
press the ”Call pickup” key.
If you have activated ”direct dialing” you must also press this key before
entering the call number
.
(→
p. 81)
Y
ou can display a list of the accumulated telephone charges.
(→
p. 64)
This allows you to dial numbers that are stored in the system, regardless of
your authorization. When you enter the code dial number
, the complete
number is dialed automatically
. Y
ou can postdial additional digits after the
code dial number (e.g. a DID number).
(→
p. 44)
Y
ou can speak to two parties simultaneously
.
Alter.
time zone
(→
p. 87)
2.
Audio/contrast
BLIN
Boss line
DIV.C
Call diversion
PICK
Call pickup
(
p. 31)
COST Charges
CODE Code
dialing
CONF Conference
To Next Page
Loading...
