Plug
connection
XY Z
AEI
AEI interface to
the underside of the
telephone
Setting up the telephone for your own specific needs
79
Handsfree with auxiliary loudspeaker -
You
can connect an auxiliary loudspeaker to your telephone. This will improve
handsfree mode.
Connecting the auxiliary loudspeaker
Pull the connector from the telephone’
s
AEI-Z-interface.
Note:
Make sure you keep your connector so that
you can deactivate the auxiliary loudspea
-
ker should it be necessary.
Connect the auxiliary loudspeaker with the
AEI-Z-interface of your telephone.
Place the auxiliary loudspeaker at a di
-
stance of at least 80cm from your tele
-
phone; in doing so, you will avoid distur
-
bing echoes.
Set auxiliary loudspeaker
Select the menu item “Acoustics+contrast”.
The current settings are displayed.
Select the smallest possible setting for the
loudspeaker volume. Handsfree talking
then functions at its best.
Set the volume of the loudspeaker by ente
-
ring a number from 1 to 8.
Menu
'acoustics+contrast
Loudsp. 1..8
To Next Page
Loading...
