If in doubt, look it up
139
Testing the telephone -
You
can test various functions on your phone.
Y
ou cannot receive calls while your phone is in test mode. Y
ou should therefore
leave the test mode once the tests have been completed.
Each tests takes just a few seconds.
Starting the functional test
Select the desired function.
Y
ou can now display the components you
wish to test.
Select the desired function, e.g. “Memory”.
The test procedure is initiated.
A malfunction is indicated on the display
accordingly. Contact your BOSCH TELE-
COM service representative if this is the
case.
Note:
This function can be used for testing the
following components:
– memory,
–
tone ringing,
– keyboard,
– display,
–
speech path (blow test).
Menu 'Test
mode
µ
Components '
Tone ringing
↓
Components 'Memory↓
To Next Page
Loading...
