If in doubt, look it up
110
Display messages during emergency operation
In
the event of a power failure your telephone automatically switches over to emer
-
gency operation. In this case the settings for some functions are changed. Depen
-
ding on the default setting, certain functions like handsfree are blocked. If the dis
-
play has not been switched of
f corresponding messages will be displayed.
Overview of messages
In order to reduce power consumption the loudspeaker has been turned of
f.
Y
ou cannot use the loudspeaker or handsfree.
In order to reduce power consumption the loudspeaker and the microphone
have been switched of
f. You cannot use handsfree but you can still use the
monitoring function.
Y
our telephone has switched over to emergency operation after a power
failure.
Y
our telephone has switched over to emergency operation. The displayed
function, e.g. loudspeaker is blocked.
Y
our telephone has switched over to emergency operation. The AEI inter
-
face is blocked. Y
ou cannot use any equipment connected to it, like for ex
-
ample a DSS module.
Note:
Depending on the default setting, the LED will be switched of
f in order to re
-
duce the power consumption. A call diversion will then no longer be signaled.
No
monitoring
No hands–free
Emergency operat.
Em.Op.–...
AEI off
To Next Page
Loading...
