Setting up the telephone for your own specific needs
77
Handsfree
e
quipmen
t
-
You
can connect KonfT
el Cu100/AEI handsfree equipment to the AEI interface of
your telephone.
Connecting handsfree equipment
Plug the connecting cable of the handsfree
equipment into the AEI interface on the un
-
derside of your telephone.
Select the “Further settings” menu item.
Select the menu item for your phone’
s ba-
sic settings.
In the display all basic settings which you
can change are shown.
Select the “Headset present” menu item
and set the menu item to “AEI”.
Select the “AEI operation” menu item and
set the menu item to “Y to ETSI & A
T”.
The settings are saved.
Now the handsfree equipment is properly
connected.
Note:
The telephone’
s internal handsfree opera
-
tion is now turned of
f.
Menu 'Further
s
ettings
Menu
'Specifications
Receive VIP functionsOff↓
Headset present AT
AE
I o
peratio
n Y ETSI AT
To Next Page
Loading...
