D
E
F
If in doubt, look it up
101
T
elephone functions overview
Using this function you can change the handset volume and the loudspea
-
ker volume, provided the loudspeaker is connected, during a call.
When your phone is in idle mode this key serves to open the menu ”Adjust
acoustics and contrast”.
By means of this key you can correct digits you have entered, e.g for a call
diversion. Y
ou can delete individual characters backwards or the entire in
-
put field.
On putting your telephone into operation the delete key is already program
-
med on a softkey. Y
ou can change this programming at any time.
Y
ou can also use this key if the programming is not shown on the display
.
(→
p. 28)
All incoming calls that you did not answer are added to the call list.
Here you can see whether there is a VIP message for you in the call list.
A door device can be activated or deactivated by means of a single keys
-
troke. Y
ou can only use this function if it has been enabled for your tele
-
phone and if a door device is connected.
(→
p. 1
16)
Y
ou can activate/deactivate the display of your call number on the tele
-
phone of the called party before the call is set up.
Function
key free
(→
p. 61)
Erase the current assignment of the function key
.
–
←
Decrease volume/contrast
(
p. 83)
CORR Delete
key
Display call list
LIST
VIP
Display VIP message
DOOR
Door device
Ext. no. display
1... → X
To Next Page
Loading...
