Bosch Intuvia - Braking System; Mechanical Brake; Hydraulic Brake

MY22B01 - 12_1.0_26.08.2021
33
Description
3.3.5 Braking system
A pedelec's brake system is primarily operated
using the brake lever on the handlebars.
• If the left brake handle is pulled, the brake on the
front wheel is applied.
• If the right brake handle is pulled, the brake on the
rear wheel is applied.
The brakes are used as an emergency stop
system and bring the bicycle to a halt quickly and
safely in the event of an emergency.
The brake is applied using the brake lever either
• with the brake lever and shift cable (mechanical
brake) or
• with the brake lever and hydraulic brake cable
(hydraulic brake).
3.3.5.1 Mechanical brake
The brake lever is connected with the brake via a
wire inside the shift cable (also known as a
Bowden cable).
Figure 20: Bowden cable structure
3.3.5.2 Hydraulic brake
The brake fluid is in a closed hose system. If the
brake lever is pulled, the brake fluid transfers
pressure to the brake on the wheel.
Figure 21: Components in a brake cable
1 Brake cable
2 Cable clip
3 Union nut
4 Cover cap
5 Knob
6 Insert pin
2
1
2
3
4
5
6
All manuals and user guides at all-guides.com