Bosch Intuvia - Preparing the LIMOTEC Seat Post

MY22B01 - 12_1.0_26.08.2021
71
Assembly
5.3.5 Preparing the LIMOTEC seat post
Only applies to pedelecs with this equipment
1 Use the seat height formula to calculate the
optimum seat post height for the length of
rider's leg:
Seat height (SH) = inner leg length (I) × 0.9
2 Lower the seat post further into the seat tube
3 The seat post Bowden cable must be tightened
in the frame up to the remote control to the
same length as the seat post was lowered.
4 Trim the seat post Bowden cable on the
handlebars if necessary.
All manuals and user guides at all-guides.com