Bosch Intuvia - System Message

MY22B01 - 12_1.0_26.08.2021
47
Description
Applies only to eShift with ROHLOFF E-14
Speedhub 500/14
3.4.2.12 System message
The drive system monitors itself continuously and
displays a number as a system message if a
known error is detected. The system may switch
off automatically depending on the type of error.
You will find more information and a table
containing all system messages in Section 6.2.
Display Change
Start gear This is where you can set the start
gear. The automatic gear switch
function is switched off in Position
– –. This menu option is only
shown when the on-board
computer is positioned in its
mount.
Gear vx.x.x.x: This is the gear software version.
This menu option is only shown
when the on-board computer is
positioned in its mount. This menu
option is only shown if you have
an electronic control gear.
Table 26: Changing the system settings
All manuals and user guides at all-guides.com