Bosch Intuvia - Grip Distance on a MAGURA HS33 Brake Lever

MY22B01 - 12_1.0_26.08.2021
97
Operation
6.5.9.6 Grip distance on a MAGURA HS33 brake lever
Only applies to pedelecs with this equipment
The brake lever position can be adjusted to the
rider's requirements. Such adjustment does not
affect the pressure point or the position of the
brake linings.
 Use a T25 TORX® wrench to turn the setting
screw (1) to adjust the grip distance.
 Turn the setting screw anti-clockwise towards
minus (–).
 The brake lever moves closer to the handlebar
grip.
 Turn the setting screw clockwise towards
plus (+).
 The brake lever moves away from the
handlebar grip.
Figure 108: Setting the grip distance on a MAGURA HS 33 brake lever
1
All manuals and user guides at all-guides.com