Bosch Intuvia - Error Message; On-Board Computer

MY22B01 - 12_1.0_26.08.2021
77
Operation
6.3 Error message
6.3.1 On-board computer
The drive system monitors itself continuously and
displays a number as an error message if a known
error is detected. The system may switch off
automatically depending on the type of error.
Code Description Method of resolution
410 One or more on-board
computer buttons are
blocked
 Check whether buttons
are jammed because dirt
has accumulated
between them, for
example.
 Clean buttons if neces-
sary.
414 Connection problem
with the control panel
 Contact your specialist
dealer. Have ports and
connections checked.
418 One or more buttons
on the control panel
are blocked
 Check whether buttons
are jammed because dirt
has accumulated
between them, for
example.
 Clean buttons if neces-
sary.
419 Configuration error 1 Re-start the system.
2 Contact your specialist
dealer if the problem
persists.
422 Battery connection
problem
 Have ports and connec-
tions checked.
423 Battery connection
problem
 Have ports and connec-
tions checked.
424 Communication error
with components
communicating with
one another
 Have ports and connec-
tions checked.
426 Internal time-out error It is not possible to display or
adjust the tyre size in the
basic settings menu in this
error status.
1 Re-start the system.
2 Contact your specialist
dealer if the problem
persists.
430 On-board computer
battery flat
 Recharge on-board
computer battery (while
in its mount or using
USB port).
431 Software version error 1 Re-start the system.
2 Contact your specialist
dealer if the problem
persists.
Table 41: List of on-board computer error messages
440 Battery internal error 1 Re-start the system.
2 Contact your specialist
dealer if the problem
persists.
450 Internal software error 1 Re-start the system.
2 Contact your specialist
dealer if the problem
persists.
460 Error in USB port 1 Re-start the system.
2 Contact your specialist
dealer if the problem
persists.
490 On-board computer
internal error
 Have on-board computer
checked.
500 Battery internal error 1 Re-start the system.
2 Contact your specialist
dealer if the problem
persists.
502 Fault in the lighting 1 Check the light and its
cabling.
2 Re-start the system.
3 Contact your specialist
dealer if the problem
persists.
503 Speed sensor error 1 Re-start the system.
2 Contact your specialist
dealer if the problem
persists.
504 Speed signal manipu-
lation detected
 Check position of spike
magnets and re-adjust if
necessary.
 Check for manipulation.
 Assistance from drive
has been reduced.
503 Speed sensor error 1 Re-start the system.
2 Contact your specialist
dealer if the problem
persists.
510 Internal sensor error 1 Re-start the system.
2 Contact your specialist
dealer if the problem
persists.
511 Battery internal error 1 Re-start the system.
2 Contact your specialist
dealer if the problem
persists.
Code Description Method of resolution
Table 41: List of on-board computer error messages
All manuals and user guides at all-guides.com