Bosch Rexroth EFC 3600 - Page 218

17.2.9 Group E2: Multi-speed and Simple PLC
Acceleration/deceleration time 2, 3 and 4
Function
code
Name Setting range
Min.
unit
Factory
default
Attribute
E2.00 Acceleration time 2 0.1 ~ 6000.0s 0.1s 10.0s
RUN/
STOP
E2.01 Deceleration time 2 0.1 ~ 6000.0s 0.1s 10.0s
RUN/
STOP
E2.02 Acceleration time 3 0.1 ~ 6000.0s 0.1s 10.0s
RUN/
STOP
E2.03 Deceleration time 3 0.1 ~ 6000.0s 0.1s 10.0s
RUN/
STOP
E2.04 Acceleration time 4 0.1 ~ 6000.0s 0.1s 10.0s
RUN/
STOP
E2.05 Deceleration time 4 0.1 ~ 6000.0s 0.1s 10.0s
RUN/
STOP
E2.06
~
E2.09
Reserved – – – –
Multi-speed frequency
Function
code
Name Setting range
Min.
unit
Factory
default
Attribute
E2.10 Multi-speed frequency 1 0.00 ~ [b1.06] 0.01 Hz 0.00 Hz
RUN/
STOP
E2.11 Multi-speed frequency 2 0.00 ~ [b1.06] 0.01 Hz 0.00 Hz
RUN/
STOP
E2.12 Multi-speed frequency 3 0.00 ~ [b1.06] 0.01 Hz 0.00 Hz
RUN/
STOP
E2.13 Multi-speed frequency 4 0.00 ~ [b1.06] 0.01 Hz 0.00 Hz
RUN/
STOP
E2.14 Multi-speed frequency 5 0.00 ~ [b1.06] 0.01 Hz 0.00 Hz
RUN/
STOP
E2.15 Multi-speed frequency 6 0.00 ~ [b1.06] 0.01 Hz 0.00 Hz
RUN/
STOP
Bosch Rexroth AG
Appendix
DOK-RCON03-EFC-3600***-IT01-EN-P
Rexroth Frequency Converter EFC 3600
216/235