Setting range 0 ~ 20
Minimum unit 1
Factory default 2
● 0: Output frequency
● 1: Output rotation speed
● 2: Set frequency
● 3: Set rotation speed
● 4: Output voltage
● 5: Output current
● 6: Output power
● 7: DC bus voltage
● 8: Analog input AIV
● 9: Analog input AIC
● 10: User-defined set frequency
● 11: User-defined output frequency
● 12: Digital input status
● 13: Digital output status
● 14: PID target engineering value
● 15: PID feedback engineering value
● 16: Module temperature
● 17: Firmware version 1
● 18: Firmware version 2
● 19: Firmware version 3
● 20: Actual carrier frequency
b0.32
User-defined proportion factor for velocity
Setting range 0.01 ~ 100.0
Minimum unit 0.01
Factory default 1.00
b0.33 PID reference / feedback coefficient
Setting range 0.01 ~ 100.0
Minimum unit 0.01
Factory default 1.00
Used for monitoring function. They only affect the displayed value of monitoring param‐
eters regarding velocity or PID control parameters.
User-defined set velocity
DOK-RCON03-EFC-3600***-IT01-EN-P
Rexroth Frequency Converter EFC 3600
Bosch Rexroth AG
Parameter Settings
57/235
To Next Page
Loading...
