8
Specifications
Audio Inputs
Mic Inputs (4 - Balanced): Connectors: 3-pin Euroblock
Input Range: 20 - 20kHz
Input Impedance: 2k ohms (Mic)
25k ohms (Line)
Equivalent Input Noise: -122dB
Line Inputs (4 - Unbalanced): Connectors: Dual RCA (summed to mono)
Input Range: 20 20kHz
Input Impedance: 10k ohms
Maximum Input Level: +10dBu
Page Input (1 - Balanced): Connector: 4-pin Euroblock
Input Range: 20 - 20kHz
Input Impedance: 400 ohms
Equivalent Noise Input: -122dB
Direct Input (1 - Balanced): Connector: 3-pin Euroblock
Input Range: 20 - 20kHz
Input Impedance: 18k ohms
Maximum Input Level: +8dBu
Audio Outputs
Amplifier Outputs (2): Connectors: 5 Terminal Reverse
Euroblock
Minimum Load: 49 ohms @ 70V
98 ohms @ 100V
Output Impedance: 4 ohms
Aux Output (1): Connector: 3-pin Euroblock
Output Impedance: 400 ohms
Maximum Output Level: 2.2 dBV
Performance
Amplifier Power: 120W @ 4 ohms, 100W @ 70/100V
THD (at full rated power): < 0.5%
Crosstalk (below rated power, 1 kHz): < -60 dBV
Signal-to-Noise ratio: 75dB (below rated power, A-weighted)
Frequency Response: 40Hz - 16kHz (+0/-3dB)
Dynamic Range: 83dB
Sampling Rate: 44.1kHz
To Next Page
Loading...
Need help?
General